Application Specific Printing/Plotting Instructions

Application Specific Instructions:

PDF Printing and Plotting (Acrobat)

The most important element in successful plotting and printing is the compatibility of your print/plot data. The PDF file format (portable document format) was invented by Adobe to ensure compatible output from screen to printer/plotter. The recommended digital file workflow for the SUSOA computer labs is to take your file and convert it to PDF, then open the PDF file in Adobe Acrobat and proceed to print. Using the PDF format allows the image to be verified and checked before you plot the file and incur charges.

By using the PDF format as an integral part of your digital workflow, you can combine graphics from AutoCAD, Rhino, Illustrator, etc. all in one seamless way for printing and plotting.

Click here for instructions on how to print PDFs from Acrobat.

Photoshop Plot/Print Setup

The most important setting in Photoshop is the "Image Size," under the "Image" menu. This is where you control your printout resolutions. Assuming you do NOT want to reduce the quality of your image, uncheck the "Resample Image" box, and set your Height and Width dimensions. Photoshop will automatically calculate your resulting resolution. Plotting to the plotters higher that 150 dpi will not result in a noticeably better quality print.

To preview your files in Photoshop to see how they will print out on your sheet select "Print with Preview" in the "File" menu. You'll get a full print preview that will allow you to add crop marks if necessary and ensure that your image will print as specified in the "page Setup" dialog.

1. Flatten Layers

Flatten all of your layers before printing. This will reduce the time it takes to spool the image. Don’t save a flattened image over the original or you lose your layers. Save a copy instead.

2. Do not select "Auto Rotate"

Do not check on the "Auto Rotate" function in the plotter driver, this will rotate the image and the image will print cropped and rotated.

3. Print images in "CMYK" Mode

Try printing your image in CMYK Mode. The recommended file formats for use are pdf, jpg and tif. By converting your image to CMYK in Photoshop it will save time and ensure optimum quality by utilizing the sophisticated CMYK conversion available in Photoshop before you send your file to the plot/print server.

However, HP has this to say on their website: "Should I be using RGB or CMYK data when printing? If a file is already CMYK, leave it in CMYK. If the file is RGB or if you have control over how it is created, use RGB. With the HP PostScript RIP and HP large format printing materials, both RGB and CMYK are handled equally well."

Illustrator Plot/Print Setup

Use the "Document Setup" in the "File" menu to setup your drawing sheet. Do NOT use the Print Setup since the print sizes will not match those in the output shop. As well, remember to take into account for printable margins.

As a recommendation, format your linked images in Photoshop to your final desired output size and to our suggested resolutions. (For example a 4"x6" output size should be formatted in Photoshop to be 4"x6" at 150 ppi. See the Photoshop section above.) Try not to scale the images in Illustrator, which creates unnecessarily large files and potential printing problems.

1. Select Postscript Level 3

In the print driver set postscript setting to PostScript Level 3.

2. Coordinate Plotter and Document Settings

Make sure the printer settings correspond to your document settings before trying to print.

3. Set your Print Border in Illustrator

Set your document setting and the printer document settings to the same size. Also make sure the print border (the gray box around your page) is completely outside your design.

InDesign Plot/Print Setup

1. Avoid Manipulating and Resizing Linked Images:

Try to avoid re-sizing, rotating or manipulating your images after you have imported them into the desktop publishing program. If you re-size the images, the print spooler has to recalculate each image, thus significantly increasing your spooling time to the plotter. Make the image modifications in PhotoShop and then re-import them.

2. Keep Linked images at the same Resolution:

Try to keep all of the imported images at the same resolution, this will allow the files to print quicker.

3. Send Crisp Images-Data setting set to "ALL" not sub-sampling:

To send crisp images, click on the graphics tab, and then in the data setting select ALL. It is set to sub sampling by default.

4. Do not select "Auto Rotate"

Do not check on the "Auto Rotate" function in the plotter driver, this will rotate the image and the image will print cropped and rotated.

AutoCAD Plot/Print Setup

AutoCad printing is tricky and everybody does it a little differently. If you haven't printed before or you're not extremely familiar with the process, make sure you allow yourself plenty of time for problem solving and potential repeated attempts. It is highly recommended that you use pdf printing to ensure your plot accuracy when outputting from AutoCAD.

You can set up your line weights in two possible ways: from within your layers or in a "Plot style table" (a CTB file). If you use a CTB file, rename it to something that is unique from the default AutoCAD ones. To lay out your sheets, use the "Layout" tabs. In the "Print Setup" (under the "File" menu), there are two tabs. If you are using a non-standard paper size, click on "Properties" and you can add it into the "Custom Paper Sizes" section. Now, while you're still in "Print Setup," go to the "Layout Settings" tab. Choose your desired "Paper Size" and your "Drawing orientation" (Portrait or Landscape).

1. Define Drawing boundaries first

Make sure you define your drawing boundaries before plotting. This will prevent the files from printing out to infinity.

2. Do a Page Setup before plotting

Setup your plots through the page setup first, and then go through the plotting setup.

3. Set the plot device

Make sure you set the plot device in the Plot Device window, in page setup.

4. Define a plot window, do not use Plot to Extents

Make sure you define a plot window, either through Paper space, or by defining a window. Do not use plot to extents.

5. Do not select "Auto Rotate"

Do not check on the "Auto Rotate" function in the plotter driver, this will rotate the image and the image may print cropped and rotated.

6. Do a full Preview before plotting

Make sure you do a "Full Preview" of the drawing first before plotting.

ArcGIS Print/Plot Setup

Another exception is plotting from ArcGIS. To our knowledge, the best way to plot from ArcGIS is to save the file as a JPEG and print from another application.

Powerpoint Print/Plot Setup

From Powerpoint use "Save As" and select the "web page" option, and choose jpeg or tif from the drop down menu. Then open file in Photoshop. At this point plot normally from Photoshop (ie. custom paper size,etc).


From the Syracuse University School of Architecture